[. . . ] the risk WARNING orTo reducepersons: of burns , fire , electric shock , injury to 1. Close attention is necessary when this sewing machine is used by or near children. Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual. [. . . ] When you pressed clear “C” button, machine will return to regular stitch (also elongation will return to regular length. ELONGATION You can elongate the pattern to two times the length by pressing the function button (F3) directly under the elongation mark. Elongated (2 X) If the mark is not indicated, its pattern can not elongate. When you pressed clear “C” button, machine will return to regular length (also mirror/reverse will return to regular stitch. SETTING STITCH WIDTH AND LENGTH Machine will set the stitch width and length suitable for the pattern. You can make changes by pressing the function button (F4) directly under the width and length mark. When you pressed clear “C” button, machine will return to preset stitch width and length. When you pressed return button (F1), LCD will indicate previous mode (Stitch Information mode). Note: When further width or length adjustment is not possible, machine will emit multiple audible beeps. If the mark of width, length is not indicated, or number is not indicated, its pattern can not change it. Straight stitch center needle positon • For top stitching, zipper sewing etc. Overcasting foot should be used for sewing patterns 9, 15, 16, 30 only and do not change the stitch width narrower than 5. It is possible that needle could hit the presser foot and break when sewing other patterns and width. 9, 12 General Purpose Foot (A) Place fabric so that needle will fall nearest to edge of fabric when using the General Purpose Foot. NOTE: You can also cut off the excess material after sewing the inside of fabric. The guide (e) on the blind foot ensures even feeding of the fabric when blind hem stitching. Place fabric so that the straight stitches (or small zigzag stitches) are on the protruding hem edge and the large zigzag stitches just catch one thread of the folded edge (g). Turn the screw so that the guide barely touches the folded edge of fabric. Lower the presser foot and sew hem, guiding fabric evenly along the guide. Place two pieces of fabric right sides together and sew a long straight stitch. Fix applique on fabric with fabric glue, fusible iron-on or basting stitches. Sew edge of applique, while dropping the needle as close to the edge as possible. [. . . ] By pressing the function F3 (AUTO) button, thread tension will return to pre-set. By pressing the return button (F1), machine will return to editing mode. Note If you press the clear “C” button at editing mode, highlighted pattern will be deleted as same as selecting mode. TO RECALL THE SELECTED PATTERNS If you change the pattern to utility stitch, machine will retain the selected patterns. [. . . ]